Reliable Supplier Membrane Bioreactor Design - MBR Membrane Module Reinforced PVDF BM-SLMBR-20 Sewage Treatment – Bangmo

Short Description:

Product Detail

Product Tags

Feedback (2)

Our commission should be to provide our end users and clients with very excellent and aggressive portable digital products and solutions for Ultrafilter Membrane , Water Treatment Filtration , Ro Water Filter Membrane , Create Values,Serving Customer! is the aim we pursue. We sincerely hope that all customers will establish long term and mutually beneficial cooperation with us.If you wish to get more details about our company, Please contact with us now.

Reliable Supplier Membrane Bioreactor Design - MBR Membrane Module Reinforced PVDF BM-SLMBR-20 Sewage Treatment – Bangmo Detail:

Product Overview

MBR is a combination of membrane technology and bio-chemical? reaction? in water treatment. MBR filter the sewage in bio-chemical tank with membrane so that sludge and water are separated. On one hand, membrane rejects microorganisms in the tank, which greatly increase the concentration of activated sludge to a high level, thus the bio-chemical reaction of sewage degradation processes more rapidly and thoroughly. On the other hand, water output is clear and of high quality because of high precision of membrane.

This product adopts reinforced modified PVDF material, which will not peel or break? during? backwashing,? meanwhile? it? has? good? permeable? rate, ?mechanical performance,? chemical? resistance? and? anti-fouling? ability.? ID? &? OD? of? reinforced hollow fiber membrane are 1.0mm and 2.2mm respectively, filtering precision is 0.1 micron. ?Filtering? direction? is? outside-in,? that? is? raw? water,? driven? by? differential pressure, permeates into the hollow fibers, while bacteria, colloids, suspended solids and microorganisms etc. are rejected in the membrane tank.

Applications

●Treatment, recycle and reuse of industrial waste water;

●Treatment of refuse leachate;

●Upgrade and reuse of municipal sewage.

Filtration?Performance

Below? filtration ?effects? are? proved? according? to? the? use? of? modified? PVDF hollow fiber ultrafiltration membrane in different types of water:

No.	Item	Water?Output?Index
1	TSS	≤1mg/L
2	Turbidity	≤1
3	CODcr	Removal rate depends on the bio-chemical performance & designed sludge concentration
4	NH3-H	(Instant?removal?rate?≤30% without?bio-chemical)

Specifications

Size

svsdv

Technical?Parameters:

Filtering Direction	Outside-in
Membrane Material	Reinforced Modified PVDF
Precision	0.1? micron
Membrane?Area	20m2
Membrane ID/OD	1.0mm/ 2.2mm
Size	785mm×1510mm×40mm
Joint Size	DN32

Component?Material:

Component	Material
Hollow Fiber Membrane	Reinforced Modified PVDF
Sealing Compound	Epoxy Resins + Polyurethane (PU)
Housing	ABS

Using?Conditions

Proper?? pretreatments?? must?? be?? set ??when?? raw?? water?? contains?? a?? lot?? of impurities/coarse particles or large proportion of grease. Defoamer must be used to remove foams? in? membrane tank when? necessary,? please? use alcoholic defoamer which is not easy to scale.

Item	Limit	Remark
PH Range	5-9 (2-12 when washing)	Neutral PH is better for bacterial culture
Particle Diameter	<2mm	Prevent sharp particles to scratch membrane
Oil & Grease	≤2mg/L	Prevent membrane fouling/sharp flux decrease
Hardness	≤150mg/L	Prevent membrane scaling

Application?Parameters:

Designed?Flux	10~25L/m2.h
Backwashing Flux	Twice the designed flux
Operating Temperature	5~45°C
Maximum Operating Pressure	-50KPa
Suggested Operating Pressure	≤-35KPa
Maximum backwashing Pressure	100KPa
Operating Mode	Operate 9min & Stop 1min/Operate 8min & Stop 2min
Blowing?Mode	Continuous Aeration
Aeration Rate	4m3/h.piece
Washing Period	Clean water backwashing every 2~4h; CEB every 2~4 days;Offline washing every 6~12 months(Above information is for reference only, please adjustaccording to actual differential pressure change rule)

Product detail pictures:

Related Product Guide:

We now have our individual sales group, layout team, technical team, QC crew and package group. Now we have strict high-quality control procedures for each procedure. Also, all of our workers are experienced in printing discipline for Reliable Supplier Membrane Bioreactor Design - MBR Membrane Module Reinforced PVDF BM-SLMBR-20 Sewage Treatment – Bangmo , The product will supply to all over the world, such as: United Arab Emirates , Serbia , Namibia , We take measure at any expense to achieve essentially up-to-date equipment and approaches. The packing of nominated brand is our a further distinguishing feature. The products to assure years of trouble-free service has attracted a great deal customers. The solutions are obtainable in improved designs and richer assortment, they're created scientifically of purely raw supplies. It readily available in a variety of designs and specifications for your selection. recent kinds are a great deal better than the preceding one particular and they are quite popular with lots of prospects.

Cross Flow Membrane