Professional China Submerged Membrane Bioreactor - MBR Membrane Module Reinforced PVDF BM-SLMBR-30 Replacing Project – Bangmo
Professional China Submerged Membrane Bioreactor - MBR Membrane Module Reinforced PVDF BM-SLMBR-30 Replacing Project – Bangmo Detail:
Product Overview
MBR is a combination of membrane technology and bio-chemical reaction in water treatment. MBR filter the sewage in bio-chemical tank with membrane so that sludge and water are separated. On one hand, membrane rejects microorganisms in the tank, which greatly increase the concentration of activated sludge to a high level, thus the bio-chemical reaction of sewage degradation processes more rapidly and thoroughly. On the other hand, water output is clear and of high quality because of high precision of membrane.
This product adopts reinforced modified PVDF material, which will not peel or break when backwashing, meanwhile has good permeable rate, mechanical performance, chemical resistance and pollution resistance. ID & OD of reinforced hollow fiber membrane are 1.0mm and 2.2mm respectively, filtration precision is 0.1 micron. Filtration mode is outside-in, that is raw water, driven by differential pressure, permeates into the hollow fibers, while bacteria, colloids, suspended solids and microorganisms etc. are rejected in the membrane tank.
Applications
Treatment, recycle and reuse of industrial waste water.
Treatment of refuse leachate.
Upgrade and reuse of municipal sewage.
Filtration Performance
Below filtration effects are proved according to the use of modified PVDF hollow fiber ultra filtration membrane in different types of water:
| No. | Item | Output?Index |
| 1 | TSS | ≤1mg/L |
| 2 | Turbidity | ≤1 |
| 3 | CODcr | Removal?rate?depends?on?the?bio-chemicalperformance?& designed?sludge?concentration(Instant?removal?rate?of?membrane?is?≤30% without
bio-chemical?function) |
| 4 | NH3-H |
Specifications
Technical Parameters
| Structure | Outside-in |
| Membrane?Material | Reinforced Modified?PVDF |
| Pore?Size | 0.1 micron |
| Membrane?Area | 30m2 |
| Membrane?ID/OD | 1.0mm/2.2mm |
| Size | 1250mm×2000mm×30mm |
| Joint?Size | Φ24.5mm |
Application Parameters
| Designed?Flux | 10~25L/m2.h |
| Backwashing?Flux | Twice the designed flux |
| Operating?Temperature | 5~45°C |
| Maximum?Operating?Pressure | -50KPa |
| Suggested?Operating?Pressure | ≤-35KPa |
| Maximum?backwashing?Pressure | 100KPa |
| Operating?Mode | 8/9min?on+2/1min?pause |
| Aeration?Mode | Continuous?Aeration |
| Aeration?Rate | 4m3/h.piece |
| Washing?Period | Clean?water?backwashing?every?2~4h;?CEB?every?2~4 weeks;CIP?every?6~12 months.???????????*Abovefrequenciesareforreferenceonly,pleaseadjustaccordingtoactualchangeof?differentialpressure. |
Using Conditions
Appropriate pretreatments must be taken when raw water contains a lot of impurities and coarse particles, or oil and grease account for a large proportion in the water. Defoamer should be added when necessary to remove foam in membrane tank, please use alcohol defoamer which is not? ?easy to foul.
| Item | Value | Remark |
| PH | Operate: 5-9Wash: 2-12 | Neutral?PH is good?for?bacteria?culture |
| Particle?Diameter | <2mm | Sharp?particles?will?scratch?membrane |
| Oil & Grease | ≤2mg/L | High content will?affect?membrane?flux |
| Hardness | ≤150mg/L | High content will?cause?fouling |
Component Material
| Component | Material |
| Hollow Fiber Membrane | Reinforced Modified?PVDF |
| Sealing Compound | Epoxy Resins?+ Polyurethane?(PU) |
| Housing | ABS |
Product detail pictures:
Related Product Guide:
Assume full duty to satisfy all demands of our clients; reach steady advancements by marketing the development of our purchasers; grow to be the final permanent cooperative partner of clientele and maximize the interests of customers for Professional China Submerged Membrane Bioreactor - MBR Membrane Module Reinforced PVDF BM-SLMBR-30 Replacing Project – Bangmo , The product will supply to all over the world, such as: Venezuela , Italy , Stuttgart , We supply professional service, prompt reply, timely delivery, excellent quality and lower price to our customers. Satisfaction and good credit to every customer is our priority. We focus on every detail of order processing for customers till they have received safe and sound products with good logistics service and economical cost. Depending on this, our products are sold very well in the countries in Africa, the Mid-East and Southeast Asia. Adhering to the business philosophy of ‘customer first, forge ahead', we sincerely welcome clients from at home and abroad to cooperate with us.
By Hazel
from Istanbul
- 2018.09.21 11:44
The factory workers have a good team spirit, so we received high quality products fast, in addition, the price is also appropriate, this is a very good and reliable Chinese manufacturers.
By Rita
from belarus
- 2018.09.21 11:44
