MCR Membrane Module Reinforced PVDF BM-SLMCR-25 Surface Water Purification

Product Overview

Submerged ultrafiltration (MCR) Technology is a water treatment technology which combines membrane technology and physico-chemical precipitation process. High-precision sludge-water separation of outlet from coagulation sedimentation tank can be done by submerged ultrafiltration (MCR), high filtering precision of memrbane insures high quality and clear water outlet.

This product adopts reinforced modified PVDF material, which will not peel or break during backwashing, meanwhile it has good permeable rate, mechanical performance, chemical resistance and anti-fouling ability. ID & OD of reinforced hollow fiber membrane are 1.0mm and 2.2mm respectively, filtering precision is 0.03 micron. Filtering direction is outside-in, that is raw water, driven by differential pressure, permeates into the hollow fibers, while bacteria, colloids, suspended solids and microorganisms etc. are rejected in the membrane tank.

product details

Product Tags

Applications

● Purification of surface water.
● Reuse of heavy metal waste water.
● Pretreatment of RO.

Filtration Performance

Below filtration effects are proved according to the use of modified PVDF hollow fiber ultrafiltration membrane in different types of water:

No.	Item	outlet water index
1	TSS	≤1mg/L
2	Turbidity	≤ 1

Specifications

Size

Chart 1 MBR Size

Technical Parameters

Filtering?Direction	Outside Pressure
Membrane?Material	Reinforced?Modified?PVDF
Precision	0.03 ?micron
Membrane?Area	25m²
Membrane?ID/OD	1.0mm/ 2.2mm
Size	785mm×2000mm×40mm
Joint?Size	DN32

Component Material

Component	Materials
Membrane	Reinforced?Modified?PVDF
Sealing	Epoxy?Resins?+?Polyurethane (PU)
Membrane shell	ABS

Using Conditions

Proper pretreatments must be set when raw water contains a lot of impurities/coarse particles or large proportion of grease. Defoamer must be used to remove foams in membrane tank when necessary, please use alcoholic defoamer which is not easy to scale.

Item	Limit	Remark
PH?Range	5-9 (2- 12 when?washing)	Neutral?PH?is?better?for?bacterial?culture
Particle?Diameter	<2mm	Prevent?sharp?particles?to?scratch?membrane
Oil?&?Grease	≤2mg/L	Prevent?membrane?fouling/sharp?flux?decrease
Hardness	≤150mg/L	Prevent?membrane?scaling

Application Parameters

Designed?Flux	15~40L/m2.h
Backwashing?Flux	Twice?the?designed?flux
Operating?Temperature	5~45°C
Maximum?Operating?Pressure	-50KPa
Suggested?Operating?Pressure	≤-35KPa
Maximum?backwashing?Pressure	100KPa
Operating?Mode	Continuous?opeartion, intermittent?backwashing?air?flushing
Blowing?Mode	Continuous?Aeration
Aeration?Rate	4m3/h.piece
Washing?Period	Clean?water?backwashing?every?1~2h; CEB?every?1~2 days;Offline?washing?every?6~12 months(Above?information?is?for?reference?only, please?adjustaccording?to?actual?differential?pressure?change?rule)