Manufacturer of Ultra Filtered Water - MBR Membrane Module Reinforced PVDF BM-SLMBR-25 Waste Water Treatment – Bangmo
Manufacturer of Ultra Filtered Water - MBR Membrane Module Reinforced PVDF BM-SLMBR-25 Waste Water Treatment – Bangmo Detail:
Product Overview
MBR is a combination of membrane technology and bio-chemical reaction in water treatment. MBR filter the sewage in bio-chemical tank with membrane so that sludge and water are separated. On one hand, membrane rejects microorganisms in the tank, which greatly increase the concentration of activated sludge to a high level, thus the bio-chemical reaction of sewage degradation processes more rapidly and thoroughly. On the other hand, water output is clear and of high quality because of high precision of membrane.
This product adopts reinforced modified PVDF material, which will not peel or break when backwashing, meanwhile has good permeable rate, mechanical performance, chemical resistance and pollution resistance. ID & OD of reinforced hollow fiber membrane are 1.0mm and 2.2mm respectively, filtration precision is 0.1 micron. Filtration mode is outside-in, that is raw water, driven by differential pressure, permeates into the hollow fibers, while bacteria, colloids, suspended solids and microorganisms etc. are rejected in the membrane tank.
Applications
●Treatment, recycle and reuse of industrial waste water.
●Treatment of refuse leachate.
●Upgrade and reuse of municipal sewage.
Filtration Performance
| No. | Item | Water?Output?Index |
| 1 | TSS | ≤1mg/L |
| 2 | Turbidity | ≤?1 |
Specifications
Size
Technical Parameters
| Structure | Outside-in |
| Membrane?Material | Reinforced Modified?PVDF |
| Precision | 0.1 ?micron |
| Membrane?Area | 25m2 |
| Membrane?ID/OD | 1.0mm/ 2.2mm |
| Size | 785mm×2000mm×40mm |
| Joint Size | DN32 |
Component Material
| Component | Material |
| Hollow Fiber Membrane | Reinforced Modified PVDF |
| Sealing Compound | Epoxy Resins + Polyurethane?(PU) |
| Housing | ABS |
Application Parameters
| Designed?Flux | 10~25L/m2.h |
| Backwashing?Flux | 30~60L/m2.h |
| Operating Temperature | 5~45°C |
| Maximum Operating Pressure | -50KPa |
| Suggested?Operating?Pressure | 0~-35KPa |
| Maximum?backwashingPressure | 100KPa |
| Operating Mode | 9min?Operation+1min?Break/8min?Operaetion+2min Break |
| Blowing?Mode | Continuous Aeration |
| Aeration?Rate | 4m3/h.pc |
| Washing Period | Clean?water?backwashing?every?2~4h; CEB?every?2~4 weeks; CIP?every?6~12 months |
Using Conditions
There should be appropriate pretreatments before UF. If defoamer has to be used, please choose alcohol defoamer, silicone defoamer is forbidden.
| Item | Value |
| PH?Range | 5~9 (washing: 2~12) |
| Particle?Size | <2mm, no?sharp?particles |
| Oil & Grease | ≤2mg/L |
| Hardness | ≤150mg/L |
Product detail pictures:
Related Product Guide:
abide by the contract, conforms into the market requirement, joins in the market competition by its good quality also as provides a lot more comprehensive and great company for purchasers to let them turn into huge winner. The pursue from the firm, would be the clients' gratification for Manufacturer of Ultra Filtered Water - MBR Membrane Module Reinforced PVDF BM-SLMBR-25 Waste Water Treatment – Bangmo , The product will supply to all over the world, such as: Albania , Bangkok , San Francisco , Thus far, our item associated with printer dtg a4 may be shown in foreign nations as well as urban centers, which are sought after simply by targeted traffic. We all highly imagine that now we have the full capacity to present you with contented merchandise. Desire to collect requests of your stuff and produce the long-term co-operation partnership. We very seriously promise:Csame high quality, better price; exact same selling price, higher quality.
By Laurel
from Romania
- 2018.12.22 12:52
We have been looking for a professional and responsible supplier, and now we find it.
By Mandy
from Peru
- 2017.12.09 14:01
