High Quality for Water Filter Replacement Filter - MCR Membrane Module Reinforced PVDF BM-SLMCR-30 Replacing Project – Bangmo
High Quality for Water Filter Replacement Filter - MCR Membrane Module Reinforced PVDF BM-SLMCR-30 Replacing Project – Bangmo Detail:
Applications
● Purification of surface water.
● Reuse of heavy metal waste water.
● Pretreatment of RO.
Filtration Performance
Below filtration effects are proved according to the use of modified PVDF hollow fiber ultrafiltration membrane in different types of water:
| No. | Item | Water?Output?Index |
| 1 | TSS | ≤1mg/L |
| 2 | Turbidity | ≤ 1 |
Specifications
Size
Chart 1 MBR Size
Technical Parameters
| Filtering?Direction | Outside-in |
| Membrane?Material | Reinforced?Modified?PVDF |
| Precision | 0.03 ?micron |
| Membrane?Area | 30m2 |
| Membrane?ID/OD | 1.0mm/ 2.2mm |
| Size | 1250mm×2000mm×30mm |
| Joint?Size | Φ24.5mm |
Component Material
| Component | Material |
| Hollow?Fiber?Membrane | Reinforced?Modified?PVDF |
| Sealing Compound | Epoxy?Resins?+?Polyurethane (PU) |
| Housing | ABS |
Using Conditions
Proper pretreatments must be set when raw water contains a lot of impurities/coarse particles or large proportion of grease. Defoamer must be used to remove foams in membrane tank when necessary, please use alcoholic defoamer which is not easy to scale.
| Item | Limit | Remark |
| PH?Range | 5-9 (2- 12 when?washing) | Neutral?PH?is?better?for?bacterial?culture |
| Particle?Diameter | <2mm | Prevent?sharp?particles?to?scratch?membrane |
| Oil?&?Grease | ≤2mg/L | Prevent?membrane?fouling/sharp?flux?decrease |
| Hardness | ≤150mg/L | Prevent?membrane?scaling |
Application Parameters
| Designed?Flux | 15~40L/m2.h |
| Backwashing?Flux | Twice?the?designed?flux |
| Operating?Temperature | 5~45°C |
| Maximum?Operating?Pressure | -50KPa |
| Suggested?Operating?Pressure | ≤-35KPa |
| Maximum?backwashing?Pressure | 100KPa |
| Operating?Mode | Continuous?opeartion, intermittent?backwashing?air?flushing |
| Blowing?Mode | Continuous?Aeration |
| Aeration?Rate | 4m3/h.piece |
| Washing?Period | Clean?water?backwashing?every?1~2h; CEB?every?1~2 days;Offline?washing?every?6~12 months
(Above?information?is?for?reference?only, please?adjust according?to?actual?differential?pressure?change?rule) |
Product detail pictures:
Related Product Guide:
Our target is always to satisfy our customers by offering golden support, superior value and high quality for High Quality for Water Filter Replacement Filter - MCR Membrane Module Reinforced PVDF BM-SLMCR-30 Replacing Project – Bangmo , The product will supply to all over the world, such as: Greenland , Brunei , Canberra , Due to our dedication, our products are well known throughout the world and our export volume continuously grows every year. We will continue to strive for excellence by providing high quality products that will exceed the expectation of our customers.
By Jerry
from Sri Lanka
- 2017.01.28 18:53
This is a honest and trustworthy company, technology and equipment are very advanced and the prodduct is very adequate, there is no worry in the suppliment.
By Myrna
from Uruguay
- 2017.09.16 13:44
Write your message here and send it to us
Products categories
-
Factory source Membrane Water - MBR Membrane M...
-
Factory wholesale Mbr Wastewater Treatment Proc...
-
China Factory for Water Filter For Drinking Wat...
-
2022 High quality Ultra Filtration - MBR Membr...
-
PriceList for Membrane Pressure - MBR Membrane...
-
Top Suppliers Ultrafiltration Process - UF Mem...