Factory Outlets Purification System - MCR Membrane Module Reinforced PVDF BM-SLMCR-25 Surface Water Purification – Bangmo
Factory Outlets Purification System - MCR Membrane Module Reinforced PVDF BM-SLMCR-25 Surface Water Purification – Bangmo Detail:
Applications
● Purification of surface water.
● Reuse of heavy metal waste water.
● Pretreatment of RO.
Filtration Performance
Below filtration effects are proved according to the use of modified PVDF hollow fiber ultrafiltration membrane in different types of water:
| No. | Item | Water?Output?Index |
| 1 | TSS | ≤1mg/L |
| 2 | Turbidity | ≤ 1 |
Specifications
Size
Chart 1 MBR Size
Technical Parameters
| Filtering?Direction | Outside-in |
| Membrane?Material | Reinforced?Modified?PVDF |
| Precision | 0.03 ?micron |
| Membrane?Area | 25m2 |
| Membrane?ID/OD | 1.0mm/ 2.2mm |
| Size | 785mm×2000mm×40mm |
| Joint?Size | DN32 |
Component Material
| Component | Material |
| Hollow?Fiber?Membrane | Reinforced?Modified?PVDF |
| Sealing Compound | Epoxy?Resins?+?Polyurethane (PU) |
| Housing | ABS |
Using Conditions
Proper pretreatments must be set when raw water contains a lot of impurities/coarse particles or large proportion of grease. Defoamer must be used to remove foams in membrane tank when necessary, please use alcoholic defoamer which is not easy to scale.
| Item | Limit | Remark |
| PH?Range | 5-9 (2- 12 when?washing) | Neutral?PH?is?better?for?bacterial?culture |
| Particle?Diameter | <2mm | Prevent?sharp?particles?to?scratch?membrane |
| Oil?&?Grease | ≤2mg/L | Prevent?membrane?fouling/sharp?flux?decrease |
| Hardness | ≤150mg/L | Prevent?membrane?scaling |
Application Parameters
| Designed?Flux | 15~40L/m2.h |
| Backwashing?Flux | Twice?the?designed?flux |
| Operating?Temperature | 5~45°C |
| Maximum?Operating?Pressure | -50KPa |
| Suggested?Operating?Pressure | ≤-35KPa |
| Maximum?backwashing?Pressure | 100KPa |
| Operating?Mode | Continuous?opeartion, intermittent?backwashing?air?flushing |
| Blowing?Mode | Continuous?Aeration |
| Aeration?Rate | 4m3/h.piece |
| Washing?Period | Clean?water?backwashing?every?1~2h; CEB?every?1~2 days;Offline?washing?every?6~12 months
(Above?information?is?for?reference?only, please?adjust according?to?actual?differential?pressure?change?rule) |
Product detail pictures:
Related Product Guide:
We usually believe that one's character decides products' high quality, the details decides products' excellent ,with the REALISTIC,EFFICIENT AND INNOVATIVE staff spirit for Factory Outlets Purification System - MCR Membrane Module Reinforced PVDF BM-SLMCR-25 Surface Water Purification – Bangmo , The product will supply to all over the world, such as: Suriname , kazakhstan , Swiss , We aim to build a famous brand which can influence a certain group of people and light up the whole world. We want our staff to realize self-reliance, then achieve financial freedom, lastly obtain time and spiritual freedom. We do not focus on how much fortune we can make, instead we aim to obtain high reputation and be recognized for our goods. As a result, our happiness comes from our clients satisfaction rather than how much money we earn. Ours team will do for you personally always.
By Gill
from Plymouth
- 2018.07.27 12:26
The factory technical staff not only have high level of technology, their English level is also very good, this is a great help to technology communication.
By Raymond
from Mumbai
- 2017.02.18 15:54
Write your message here and send it to us
Products categories
-
18 Years Factory Waste Water Filter System - M...
-
PriceList for Pvdf Uf Membrane - MBR Membrane ...
-
2022 China New Design Water Purifiers Filters -...
-
Special Design for Ultrafiltration Water Filter...
-
Manufactur standard Water Membrane - MBR Membr...
-
Manufactur standard Membrane Treatment - MBR M...