factory Outlets for Ultrafiltration Systems Water Treatment - MBR Membrane Module Reinforced PVDF BM-SLMBR-30 Replacing Project – Bangmo
factory Outlets for Ultrafiltration Systems Water Treatment - MBR Membrane Module Reinforced PVDF BM-SLMBR-30 Replacing Project – Bangmo Detail:
Product Overview
MBR is a combination of membrane technology and bio-chemical reaction in water treatment. MBR filter the sewage in bio-chemical tank with membrane so that sludge and water are separated. On one hand, membrane rejects microorganisms in the tank, which greatly increase the concentration of activated sludge to a high level, thus the bio-chemical reaction of sewage degradation processes more rapidly and thoroughly. On the other hand, water output is clear and of high quality because of high precision of membrane.
This product adopts reinforced modified PVDF material, which will not peel or break when backwashing, meanwhile has good permeable rate, mechanical performance, chemical resistance and pollution resistance. ID & OD of reinforced hollow fiber membrane are 1.0mm and 2.2mm respectively, filtration precision is 0.1 micron. Filtration mode is outside-in, that is raw water, driven by differential pressure, permeates into the hollow fibers, while bacteria, colloids, suspended solids and microorganisms etc. are rejected in the membrane tank.
Applications
Treatment, recycle and reuse of industrial waste water.
Treatment of refuse leachate.
Upgrade and reuse of municipal sewage.
Filtration Performance
Below filtration effects are proved according to the use of modified PVDF hollow fiber ultra filtration membrane in different types of water:
| No. | Item | Output?Index |
| 1 | TSS | ≤1mg/L |
| 2 | Turbidity | ≤1 |
| 3 | CODcr | Removal?rate?depends?on?the?bio-chemicalperformance?& designed?sludge?concentration(Instant?removal?rate?of?membrane?is?≤30% without
bio-chemical?function) |
| 4 | NH3-H |
Specifications
Technical Parameters
| Structure | Outside-in |
| Membrane?Material | Reinforced Modified?PVDF |
| Pore?Size | 0.1 micron |
| Membrane?Area | 30m2 |
| Membrane?ID/OD | 1.0mm/2.2mm |
| Size | 1250mm×2000mm×30mm |
| Joint?Size | Φ24.5mm |
Application Parameters
| Designed?Flux | 10~25L/m2.h |
| Backwashing?Flux | Twice the designed flux |
| Operating?Temperature | 5~45°C |
| Maximum?Operating?Pressure | -50KPa |
| Suggested?Operating?Pressure | ≤-35KPa |
| Maximum?backwashing?Pressure | 100KPa |
| Operating?Mode | 8/9min?on+2/1min?pause |
| Aeration?Mode | Continuous?Aeration |
| Aeration?Rate | 4m3/h.piece |
| Washing?Period | Clean?water?backwashing?every?2~4h;?CEB?every?2~4 weeks;CIP?every?6~12 months.???????????*Abovefrequenciesareforreferenceonly,pleaseadjustaccordingtoactualchangeof?differentialpressure. |
Using Conditions
Appropriate pretreatments must be taken when raw water contains a lot of impurities and coarse particles, or oil and grease account for a large proportion in the water. Defoamer should be added when necessary to remove foam in membrane tank, please use alcohol defoamer which is not? ?easy to foul.
| Item | Value | Remark |
| PH | Operate: 5-9Wash: 2-12 | Neutral?PH is good?for?bacteria?culture |
| Particle?Diameter | <2mm | Sharp?particles?will?scratch?membrane |
| Oil & Grease | ≤2mg/L | High content will?affect?membrane?flux |
| Hardness | ≤150mg/L | High content will?cause?fouling |
Component Material
| Component | Material |
| Hollow Fiber Membrane | Reinforced Modified?PVDF |
| Sealing Compound | Epoxy Resins?+ Polyurethane?(PU) |
| Housing | ABS |
Product detail pictures:
Related Product Guide:
With our excellent administration, potent technical capability and strict high quality control technique, we go on to provide our consumers with trusted quality, reasonable price ranges and fantastic providers. We intention at becoming one among your trusted partners and earning your fulfillment for factory Outlets for Ultrafiltration Systems Water Treatment - MBR Membrane Module Reinforced PVDF BM-SLMBR-30 Replacing Project – Bangmo , The product will supply to all over the world, such as: Saudi Arabia , Johor , Norwegian , With the enterprising spirit of high efficiency, convenience, practicality and innovation, and in line with such serving guidance of good quality but better price, and global credit, we've been striving to cooperate with the automobile parts companies all over the world to make a win-win partnership.
By Maud
from Malaysia
- 2017.11.01 17:04
Perfect services, quality products and competitive prices, we have work many times, every time is delighted, wish continue to maintain!
By Daisy
from Hungary
- 2017.11.20 15:58
