Factory directly Membrane Filtration Process - UF Membrane Module 9 inch PVDF Ultrafiltration Membrane Module UFf225 Dyeing Waste Water Treatment – Bangmo

Short Description:

Product Detail

Product Tags

Feedback (2)

With this motto in mind, we have become one of technologically innovative, cost-efficient, and price-competitive manufacturers for Water Membrane , Hollow Fiber Membrane Module , Membrane Treatment , We look forward to receiving your enquires soon and hope to have the chance to work together with you inside the future. Welcome to take a look at our organization.

Factory directly Membrane Filtration Process - UF Membrane Module 9 inch PVDF Ultrafiltration Membrane Module UFf225 Dyeing Waste Water Treatment – Bangmo Detail:

Product Overview

UFf225 capillary hollow fiber membrane is high polymer material, which will not have any phase change. Modified PVDF material, which is adopted on this product, has good permeable rate, good mechanical properties, good chemical resistance and pollution resistance. MWCO is 200K Dalton, membrane ID/OD is 0.8mm/1.3mm, filtering type is outside-in.

Applications

Drinking water treatment of tap water, surface water, well water and river water.
Pretreatment of RO.
Treatment, recycle and reuse of industrial waste water.

Filtration Performance

This product is proven to have below filtering effects according to the service?conditions of different water sources:

Ingredient	Effect
SS, Particles?> 1μm	Removal Rate?≥ 99%
SDI	≤ 3
Bacteria, Viruses	>?4 log
Turbidity	< 1NTU
TOC	Removal Rate: 0-25%

*Above data is obtained under the condition that feeding water turbidity is < 25NTU.

Product Parameters

product-description112

Technical Parameters:

Filtering?Type	Outside-in
Membrane?Material	Modified?PVDF
MWCO	200K Dalton
Membrane?Area	60m2
Membrane?ID/OD	0.8mm/1.3mm
Dimensions	Φ225mm*1860mm
Connector?Size	DN50

Application Data:

Pure?Water?Flux	12,000L/H?(0.15MPa, 25C)
Designed?Flux	40-120L/m2.hr?(0.15MPa, 25C)
Suggested?Working?Pressure	≤ 0.2MPa
Maximum?Transmembrane?Pressure	0.15MPa
Maximum?Backwashing?Pressure	0.15MPa
Air?Washing?Volume	0.1-0.15N m3/m2 .hr
Air?Washing?Pressure	≤ 0.1MPa
Maximum?Working?Temperature	45C
PH?Range	Working: 4-10; Washing: 2-12
Operating?Mode	Cross-flow?or?Dead-end

Feeding Water Requirements:
Before feeding water, a security filter < 50 μm should be set to prevent blockage caused?by large particles in raw water.

Turbidity	≤ 25NTU
Oil?&?Grease	≤?2mg/L
SS	≤ 20mg/L
Total?Iron	≤?1mg/L
Continuous?Residual?Chlorine	≤?5ppm
COD	Suggested?≤ 500mg/L

*Material of UF membrane is polymer organic plastic, there must not be any organic solvents in raw water.

Operating Parameters:

Backwashing?Flow?Rate	100-150L/m2.hr
Backwashing?Frequency	Every?30-60min.
Backwashing?Duration	30-60s
CEB?Frequency	0-4?times per day
CEB?Duration	5-10min.
CIP?Frequency	Every 1-3 months
Washing?Chemicals:
Sterilization	15ppm Sodium Hypochlorite
Organic?Pollution?Washing	0.2%?Sodium Hypochlorite + 0.1% Sodium Hydroxide
Inorganic?Pollution?Washing	1-2% Citric?Acid/0.2% Hydrochloric?Acid

Component Material:

Component	Material
Membrane	Modified?PVDF
Sealing	Epoxy?Resins
Housing	UPVC

Product detail pictures:

Related Product Guide:

To be a result of ours specialty and repair consciousness, our corporation has won a good popularity amid consumers everywhere in the environment for Factory directly Membrane Filtration Process - UF Membrane Module 9 inch PVDF Ultrafiltration Membrane Module UFf225 Dyeing Waste Water Treatment – Bangmo , The product will supply to all over the world, such as: Madras , Singapore , Yemen , Really should any of these items be of interest to you, please let us know. We will be pleased to give you a quotation upon receipt of one's detailed specifications. We've our personal specialist R&D enginners to meet any of the requriements, We look forward to receiving your enquires soon and hope to have the chance to work together with you inside the future. Welcome to take a look at our organization.

Mbr Wastewater Treatment Process