Factory directly Membrane Filtration Process - UF Membrane Module 10 inch PVC Ultrafiltration Membrane Module UFc250B River Water Treatment – Bangmo
Factory directly Membrane Filtration Process - UF Membrane Module 10 inch PVC Ultrafiltration Membrane Module UFc250B River Water Treatment – Bangmo Detail:
Applications
Production of mineral water, mountain spring water and other sterile liquid.
Drinking treatment of tap water, surface water, well water, river water, etc.
Pretreatment of RO.
Treatment, recycle and reuse of industrial waste water.
Filtration Performance
This product is proven to have below filtering effects according to the service?conditions of different water sources:
| Ingredient | Effect |
| SS, Particles?> 1μm | Removal Rate?≥ 99% |
| SDI | ≤ 3 |
| Bacteria, Viruses | >?4 log |
| Turbidity | < 0.1NTU |
| TOC | Removal Rate: 0-25% |
*Above data is obtained under the condition that feeding water turbidity is < 15NTU.
Product Parameters
Technical Parameters
| Filtering?Type | Inside-out |
| Membrane?Material | Modified?PVC |
| MWCO | 100K Dalton |
| Membrane?Area | 48m2 |
| Membrane?ID/OD | 1.0mm/1.8mm |
| Dimensions | Φ250mm*1710mm |
| Connector?Size | DN50 Clamping |
Application Data
| Pure?Water?Flux | 12,000L/H?(0.15MPa, 25C) |
| Designed?Flux | 35-100L/m2.hr?(0.15MPa, 25C) |
| Suggested?Working?Pressure | ≤ 0.2MPa |
| Maximum?Transmembrane?Pressure | 0.2MPa |
| Maximum?Working?Temperature | 45°C |
| PH?Range | Working: 4-10; Washing: 2-12 |
| Operating?Mode | Cross-flow?or?Dead-end |
Feeding Water Requirements
Before feeding water, a security filter < 50 μm should be set to prevent blockage caused?by large particles in raw water.
| Turbidity | ≤ 15NTU |
| Oil?&?Grease | ≤?2mg/L |
| SS | ≤ 20mg/L |
| Total?Iron | ≤?1mg/L |
| Continuous?Residual?Chlorine | ≤?5ppm |
| COD | Suggested?≤ 500mg/L |
*Material of UF membrane is polymer organic plastic, there must not be any organic solvents in raw water.
Operating Parameters
| Maximum?Backwashing?Pressure | 0.2MPa |
| Backwashing?Flow?Rate | 100-150L/m2.hr |
| Backwashing?Frequency | Every?30-60min. |
| Backwashing?Duration | 30-60s |
| CEB?Frequency | 0-4?times per day |
| CEB?Duration | 5-10min. |
| CIP?Frequency | Every 1-3 months |
| Washing?Chemicals: | |
| Sterilization | 15ppm Sodium Hypochlorite |
| Organic?Pollution?Washing | 0.2%?Sodium Hypochlorite + 0.1% Sodium Hydroxide |
| Inorganic?Pollution?Washing | 1-2% Citric?Acid/0.2% Hydrochloric?Acid |
Component Material
| Component | Material |
| Membrane | Modified?PVC |
| Sealing | Epoxy?Resins |
| Housing | UPVC |
Product detail pictures:
Related Product Guide:
We always stick to the principle Quality First, Prestige Supreme. We are fully committed to providing our clients with competitively priced quality products, prompt delivery and professional service for Factory directly Membrane Filtration Process - UF Membrane Module 10 inch PVC Ultrafiltration Membrane Module UFc250B River Water Treatment – Bangmo , The product will supply to all over the world, such as: Germany , Kenya , Pakistan , We also provide OEM service that caters to your specific needs and requirements. With a strong team of experienced engineers in hose design and development, we value every opportunity to provide products and solutions for our customers.
By Bernice
from Cape Town
- 2017.09.29 11:19
Good quality and fast delivery, it's very nice. Some products have a little bit problem, but the supplier replaced timely, overall, we are satisfied.
By Maureen
from Puerto Rico
- 2018.11.06 10:04
Write your message here and send it to us
Products categories
-
Chinese Professional Water Treatment Systems - ...
-
Professional China Submerged Membrane Bioreacto...
-
100% Original Factory Mbr Sewage Treatment Plan...
-
High Performance Water Filtration Membrane - M...
-
18 Years Factory Mbr System - MCR Membrane Mod...
-
Reliable Supplier Membrane Bioreactor Design - ...