18 Years Factory Mbr System - MCR Membrane Module Reinforced PVDF BM-SLMCR-30 Replacing Project – Bangmo

Short Description:

Product Detail

Product Tags

Feedback (2)

Based on domestic market and expand overseas business is our improvement strategy for Hollow Fiber Filtration , Uf Membrane Water Filter , Water Purifier Membrane , First business, we learn each other. Further business, the trust is getting there. Our company always at your service at any time.

18 Years Factory Mbr System - MCR Membrane Module Reinforced PVDF BM-SLMCR-30 Replacing Project – Bangmo Detail:

Applications

● Purification of surface water.
● Reuse of heavy metal waste water.
● Pretreatment of RO.

Filtration Performance

Below filtration effects are proved according to the use of modified PVDF hollow fiber ultrafiltration membrane in different types of water:

No.	Item	Water?Output?Index
1	TSS	≤1mg/L
2	Turbidity	≤ 1

Specifications

Size

product-description1

Chart 1 MBR Size

Technical Parameters

Filtering?Direction	Outside-in
Membrane?Material	Reinforced?Modified?PVDF
Precision	0.03 ?micron
Membrane?Area	30m2
Membrane?ID/OD	1.0mm/ 2.2mm
Size	1250mm×2000mm×30mm
Joint?Size	Φ24.5mm

Component Material

Component	Material
Hollow?Fiber?Membrane	Reinforced?Modified?PVDF
Sealing Compound	Epoxy?Resins?+?Polyurethane (PU)
Housing	ABS

Using Conditions

Proper pretreatments must be set when raw water contains a lot of impurities/coarse particles or large proportion of grease. Defoamer must be used to remove foams in membrane tank when necessary, please use alcoholic defoamer which is not easy to scale.

Item	Limit	Remark
PH?Range	5-9 (2- 12 when?washing)	Neutral?PH?is?better?for?bacterial?culture
Particle?Diameter	<2mm	Prevent?sharp?particles?to?scratch?membrane
Oil?&?Grease	≤2mg/L	Prevent?membrane?fouling/sharp?flux?decrease
Hardness	≤150mg/L	Prevent?membrane?scaling

Application Parameters

Designed?Flux	15~40L/m2.h
Backwashing?Flux	Twice?the?designed?flux
Operating?Temperature	5~45°C
Maximum?Operating?Pressure	-50KPa
Suggested?Operating?Pressure	≤-35KPa
Maximum?backwashing?Pressure	100KPa
Operating?Mode	Continuous?opeartion, intermittent?backwashing?air?flushing
Blowing?Mode	Continuous?Aeration
Aeration?Rate	4m3/h.piece
Washing?Period	Clean?water?backwashing?every?1~2h; CEB?every?1~2 days;Offline?washing?every?6~12 months (Above?information?is?for?reference?only, please?adjust according?to?actual?differential?pressure?change?rule)

Product detail pictures:

Related Product Guide:

We stick with the theory of quality first, company first, steady improvement and innovation to satisfy the customers for the management and zero defect, zero complaints as the quality objective. To perfect our provider, we deliver the items together with the fantastic good quality at the reasonable value for 18 Years Factory Mbr System - MCR Membrane Module Reinforced PVDF BM-SLMCR-30 Replacing Project – Bangmo , The product will supply to all over the world, such as: Plymouth , Burundi , Portland , We integrate all our advantages to continuously innovate, improve and optimize our industrial structure and product performance. We will always believe in and work on it. Welcome to join us to promote green light, together we will make a better Future!

Mbr Wastewater Treatment Process