100% Original Factory Mbr Sewage Treatment Plant - MBR Membrane Module Reinforced PVDF BM-SLMBR-30 Replacing Project – Bangmo
100% Original Factory Mbr Sewage Treatment Plant - MBR Membrane Module Reinforced PVDF BM-SLMBR-30 Replacing Project – Bangmo Detail:
Product Overview
MBR is a combination of membrane technology and bio-chemical reaction in water treatment. MBR filter the sewage in bio-chemical tank with membrane so that sludge and water are separated. On one hand, membrane rejects microorganisms in the tank, which greatly increase the concentration of activated sludge to a high level, thus the bio-chemical reaction of sewage degradation processes more rapidly and thoroughly. On the other hand, water output is clear and of high quality because of high precision of membrane.
This product adopts reinforced modified PVDF material, which will not peel or break when backwashing, meanwhile has good permeable rate, mechanical performance, chemical resistance and pollution resistance. ID & OD of reinforced hollow fiber membrane are 1.0mm and 2.2mm respectively, filtration precision is 0.1 micron. Filtration mode is outside-in, that is raw water, driven by differential pressure, permeates into the hollow fibers, while bacteria, colloids, suspended solids and microorganisms etc. are rejected in the membrane tank.
Applications
Treatment, recycle and reuse of industrial waste water.
Treatment of refuse leachate.
Upgrade and reuse of municipal sewage.
Filtration Performance
Below filtration effects are proved according to the use of modified PVDF hollow fiber ultra filtration membrane in different types of water:
| No. | Item | Output?Index |
| 1 | TSS | ≤1mg/L |
| 2 | Turbidity | ≤1 |
| 3 | CODcr | Removal?rate?depends?on?the?bio-chemicalperformance?& designed?sludge?concentration(Instant?removal?rate?of?membrane?is?≤30% without
bio-chemical?function) |
| 4 | NH3-H |
Specifications
Technical Parameters
| Structure | Outside-in |
| Membrane?Material | Reinforced Modified?PVDF |
| Pore?Size | 0.1 micron |
| Membrane?Area | 30m2 |
| Membrane?ID/OD | 1.0mm/2.2mm |
| Size | 1250mm×2000mm×30mm |
| Joint?Size | Φ24.5mm |
Application Parameters
| Designed?Flux | 10~25L/m2.h |
| Backwashing?Flux | Twice the designed flux |
| Operating?Temperature | 5~45°C |
| Maximum?Operating?Pressure | -50KPa |
| Suggested?Operating?Pressure | ≤-35KPa |
| Maximum?backwashing?Pressure | 100KPa |
| Operating?Mode | 8/9min?on+2/1min?pause |
| Aeration?Mode | Continuous?Aeration |
| Aeration?Rate | 4m3/h.piece |
| Washing?Period | Clean?water?backwashing?every?2~4h;?CEB?every?2~4 weeks;CIP?every?6~12 months.???????????*Abovefrequenciesareforreferenceonly,pleaseadjustaccordingtoactualchangeof?differentialpressure. |
Using Conditions
Appropriate pretreatments must be taken when raw water contains a lot of impurities and coarse particles, or oil and grease account for a large proportion in the water. Defoamer should be added when necessary to remove foam in membrane tank, please use alcohol defoamer which is not? ?easy to foul.
| Item | Value | Remark |
| PH | Operate: 5-9Wash: 2-12 | Neutral?PH is good?for?bacteria?culture |
| Particle?Diameter | <2mm | Sharp?particles?will?scratch?membrane |
| Oil & Grease | ≤2mg/L | High content will?affect?membrane?flux |
| Hardness | ≤150mg/L | High content will?cause?fouling |
Component Material
| Component | Material |
| Hollow Fiber Membrane | Reinforced Modified?PVDF |
| Sealing Compound | Epoxy Resins?+ Polyurethane?(PU) |
| Housing | ABS |
Product detail pictures:
Related Product Guide:
We not only will try our great to offer you excellent services to each individual client, but also are ready to receive any suggestion offered by our buyers for 100% Original Factory Mbr Sewage Treatment Plant - MBR Membrane Module Reinforced PVDF BM-SLMBR-30 Replacing Project – Bangmo , The product will supply to all over the world, such as: Grenada , Porto , Paraguay , Over the years, with high-quality solutions, first- class service, ultra-low prices we win thee trust and favor of customers. Nowadays our products sell all over the domestic and abroad. Thanks for the regular and new customers support. We offer high quality product and competitive price, welcome the regular and new customers cooperate with us!
By Flora
from Toronto
- 2018.06.28 19:27
The company comply with the contract strict, a very reputable manufacturers, worthy a long-term cooperation.
By Carol
from Indonesia
- 2018.03.03 13:09
